Dagligt vattenbehov och topplast per stall.
Dimensionera lagring, pumpar och inkommande rör — inklusive spädvatten för evaporativ kylning. Preliminär planering före offertförfrågan.
Inputs
Results
- Drinker demand
- 7500 L/day
- Cooling demand
- 115200 L/day
- Total daily
- 122700 L/day
- Peak-hour drinker
- 469 L/h
122.7 m³/day
Preliminary planning result, based on the inputs and assumptions shown.
Dagligt vattenbehov = fåglar × liter per fågel och dag, plus 3 L/min per m² kylpad under de varma timmarna. Ett stall med 30 000 fåglar, 0,25 L/fågel och 80 m² pad i 8 timmar behöver cirka 7 500 L dricksvatten och totalt 115 m³ per dygn; dimensionera lagring för minst 24 timmar.
Så använder du den
- Ange antal fåglar och liter per fågel och dag.
- Lägg till kylpadens yta och antal varma timmar per dag.
- Använd flödet under topptimmen för rördimensionering och dygnsvolymen för lagring.
Scope of this tool
What this tool can and can't do
Dagligt vattenbehov och topplast per stall. is a planning tool for budget-stage and RFQ-stage decisions. It gives defensible numbers to compare suppliers against — it is not an engineering, veterinary or financing approval.
What it can do
- Convert animal numbers, cycle length and intake curves into monthly and annual compound feed tonnage.
- Add a waste and shrinkage allowance so contracted volume matches real consumption.
- Split the total into stage-level volumes (starter, grower, finisher) for tender lots.
- Give an indicative annual feed spend at the price you enter.
What it can't do
- Predict mortality, disease events or intake depression caused by heat stress or water quality.
- Replace weighbridge or silo data once the operation is running — it is a planning model, not a reconciliation tool.
- Include freight, duties, demurrage or financing cost unless you add them to the price input.
- Guarantee supplier availability at the volume or price you plan against.
Required inputs
- · Number of animals, or placements per cycle and cycles per year
- · Average daily intake or a stage intake curve
- · Cycle length in days (or days in the feeding window)
- · Waste / shrinkage allowance in percent
- · Optional: feed price per tonne for the spend estimate
Example run
- · 50,000 broilers per cycle, 6.5 cycles per year, 35-day cycle
- · Average intake 105 g/bird/day
- · Waste allowance 3%
- · Feed price 390 USD/tonne
- → Per cycle: 183.75 t plus 3% waste = 189.3 t
- → Annual requirement: approximately 1,230 t of compound feed
- → Indicative annual feed spend: about 480,000 USD at 390 USD/t
What can change the result?
- · Animal numbers and cycle length
- · Intake curve and stage split
- · Mortality, waste and shrinkage allowance
- · Feed price per tonne
- · Season, climate and management effects
AI agents may use FeedMatch calculators to structure preliminary feed requirements and RFQs. Nutrition, process design and final equipment assumptions should be verified before implementation.
Use the annual tonnage as the contract volume in your RFQ, and ask suppliers to quote per stage lot. Start a structured RFQ.