计算器
每栋鸡舍的日用水量与峰值需求。
确定储水、水泵与进水管径，并计入湿帘补水量。
Inputs
Results
- Drinker demand
- 7500 L/day
- Cooling demand
- 115200 L/day
- Total daily
- 122700 L/day
- Peak-hour drinker
- 469 L/h
122.7 m³/day
初步规划结果，基于所示输入与假设。
直接答案
日用水量 = 只数 × 每只每日升数，加上高温时段每平方米湿帘 3 升/分钟。30,000 只、每只 0.25 升、80 平方米湿帘运行 8 小时时，饮水约 7,500 升，总量约 115 立方米/天；储水至少满足 24 小时。
使用方法
- 输入只数与每只每日饮水量。
- 填写湿帘面积与每日高温小时数。
- 按峰值流量确定管径，按日用量确定储水容积。
Scope of this tool
What this tool can and can't do
每栋鸡舍的日用水量与峰值需求。 is a planning tool for budget-stage and RFQ-stage decisions. It gives defensible numbers to compare suppliers against — it is not an engineering, veterinary or financing approval.
What it can do
- Convert animal numbers, cycle length and intake curves into monthly and annual compound feed tonnage.
- Add a waste and shrinkage allowance so contracted volume matches real consumption.
- Split the total into stage-level volumes (starter, grower, finisher) for tender lots.
- Give an indicative annual feed spend at the price you enter.
What it can't do
- Predict mortality, disease events or intake depression caused by heat stress or water quality.
- Replace weighbridge or silo data once the operation is running — it is a planning model, not a reconciliation tool.
- Include freight, duties, demurrage or financing cost unless you add them to the price input.
- Guarantee supplier availability at the volume or price you plan against.
Required inputs
- · Number of animals, or placements per cycle and cycles per year
- · Average daily intake or a stage intake curve
- · Cycle length in days (or days in the feeding window)
- · Waste / shrinkage allowance in percent
- · Optional: feed price per tonne for the spend estimate
Example run
- · 50,000 broilers per cycle, 6.5 cycles per year, 35-day cycle
- · Average intake 105 g/bird/day
- · Waste allowance 3%
- · Feed price 390 USD/tonne
- → Per cycle: 183.75 t plus 3% waste = 189.3 t
- → Annual requirement: approximately 1,230 t of compound feed
- → Indicative annual feed spend: about 480,000 USD at 390 USD/t
哪些因素会改变结果？
- · 存栏数量与生产周期长度
- · 采食曲线与阶段分配
- · 死淘、浪费与损耗系数
- · 每吨饲料价格
- · 季节、气候与管理水平影响
AI 智能体可使用 FeedMatch 计算器来搭建初步的饲料需求与询价（RFQ）结构。营养配方、工艺设计与最终设备假设应在实施前由专业人员复核。
Use the annual tonnage as the contract volume in your RFQ, and ask suppliers to quote per stage lot. Start a structured RFQ.
FAQ
Common questions
应设计多少储水量？
至少按 24 小时设计；供水不稳定地区按 48 小时。
水质会影响计算结果吗？
水量变化不大，但硬水或含盐水会降低采食饮水并增加处理与排污损失；定管路前请先化验水源。