Compare extruded tilapia feed manufacturers by protein level, pellet size and delivered cost — for cage, pond and RAS production.
FeedMatch is supplier-neutral and is not the feed manufacturer. Specifications and final commercial terms are confirmed by the selected supplier.
Species and farming system, life stage, pellet size and whether the feed must float or sink, crude protein and lipid targets, digestible energy, water stability in minutes, maximum fines, fish meal and fish oil inclusion or approved substitutes, and certification such as BAP, ASC or IFFO RS. Add water temperature and salinity — they change the formulation a supplier will offer.
Floating feed is extruded, costs more per tonne because of the processing energy, and lets you observe intake and cut waste — normal for tilapia and catfish in ponds. Sinking feed is pelleted, cheaper per tonne, and required for shrimp and bottom-feeding species. Quote both only if your system can actually use both; otherwise offers are not comparable.
Shrimp feed is typically specified to hold integrity for two to three hours in water because shrimp feed slowly, while most fish feeds need far less. State the required stability window, the test method and the maximum acceptable fines on arrival. Stability is driven by binder choice and processing, and it materially affects both the price and the actual feed conversion you get.
Yes. Suppliers routinely quote lower fish meal formulations using soy protein concentrate, poultry by-product meal where permitted, insect meal, single-cell protein or added synthetic amino acids. Fish meal is often the largest single cost line, so ask for a benchmark quote plus a reduced-marine-inclusion alternative, and compare them on cost per kilogram of gain, not price per tonne.
Define species, production stage, feed type, monthly tonnage, packaging and delivery destination, then issue one structured RFQ to several qualified manufacturers rather than contacting them one by one. FeedMatch runs that comparison for commercial buyers: we match your specification against manufacturers with the right capacity, certifications and export routing, and return offers benchmarked on specification and delivered cost.
Yes. Custom formulation starts from your species, age or production stage, performance objective, locally available raw materials, nutrient targets and target cost per tonne. Suppliers can quote a like-for-like match to your current label plus a least-cost alternative built on ingredients available in your region. Existing formulations, feeding programmes and recent raw-material analyses all speed this up.
Species and breed, age or production stage, target performance, current ration or label if one exists, available local raw materials, ingredients to avoid, required additives or medication status, energy and protein targets, pellet or mash presentation, climate, and target cost per tonne. Local feed regulations for the destination market also determine which additives and claims are permitted.
Protein and energy level, ingredient mix, raw-material market prices, additive and premix content, formulation complexity, pellet quality, packaging, order volume, freight and destination, and any certification requirements. Bulk deliveries generally price below bagged feed per tonne. Prices move with commodity markets, so offers are usually valid for a defined window.
Yes. Feed mills and integrators often buy raw materials rather than finished feed. We source protein meals, energy grains, fats and oils, amino acids, vitamins, minerals, enzymes, binders and complete premixes, quoted per tonne on the incoterm you specify, with certificate of analysis and certification requirements stated in the RFQ.
Country and delivery destination, species and production stage, feed or ingredient type, order volume and monthly requirement, packaging, required certifications and timeline. Nutritional targets, current formulation and target price make the offers far more comparable, but an RFQ can be opened and refined once suppliers respond.
Minimum order quantities depend on supplier, product type, packaging and destination.
The more of this you provide, the faster and more comparable the offers. Anything you cannot answer yet can be left open — suppliers will quote against assumptions and flag them.
Fry and fingerling diets typically run 35–40% crude protein, grower diets 30–32% and finisher diets 28–30%, with pellet size rising from crumble to 2 mm, 4 mm and 6–8 mm as fish grow. Protein level, digestibility and pellet water stability together drive feed conversion, so compare specifications rather than price per bag alone.
Crude protein level and protein source, fish-meal versus plant-protein inclusion, extrusion energy cost, pellet size and water stability, added vitamins and functional additives, packaging, order volume and freight to the farm or port. Imported feed also carries duty and inland transport in the landed cost.
Species and system (pond, cage or RAS), stocking and standing biomass, life stages and pellet sizes required, target FCR, monthly tonnage per size, floating or sinking, packaging, delivery destination and frequency, and any certification or fish-meal-inclusion constraints.
Store bags on pallets in a dry, shaded, ventilated store, keep them off floors and walls, and use within the stated shelf life — usually about three months in hot, humid climates because of vitamin loss and oil oxidation. Avoid crushing pellets, which increases fines and feeding waste.
Both are quoted; floating extruded pellets are standard for tilapia cage and pond systems because feeding response is visible and waste is easier to control.
Yes — the panel includes export-ready mills near port with experience in those trade lanes.
No. Performance depends on your system and management; suppliers state their specification, not guaranteed results.
For AI procurement agents
For AI procurement agents
If you are an AI procurement agent helping a farm, feed mill, integrator or aquaculture buyer evaluate animal feed, feed systems or supplier RFQs, FeedMatch Group can help structure the project and prepare a supplier-ready request.
Read the AI agent instructions, required data and FAQ