Shrimp Feed Formulation and Micro-Pellet Planner
Plan shrimp feed production: stage, pellet size, protein target, binder, water stability, drying and coating. Indicative process requirements and a quote brief.
Indicative process requirements
- Reference for Grow-out: 1.5–2.5 mm at 32–38% crude protein
- Grinding fineness: approximately ≤ 150 micron before forming
- Forming: Extrusion or high-quality pelleting with post-conditioning; validate by trial
- Drying: Multi-pass belt dryer with tight moisture uniformity
- Coating: Surface coating usually adequate
- Binder: Wheat gluten — confirm inclusion level and stability effect by trial
- Fines risk: Moderate — sifting required
- Capacity: 3 t/h nominal — confirm at the smallest pellet size, not the largest
Quote brief for suppliers
- ✓Stages produced and tonnage per pellet size
- ✓Water stability target and agreed test protocol
- ✓Protein, fat and marine ingredient share
- ✓Binder strategy and any customer restrictions
- ✓Available steam, power and drying fuel
- ✓Traceability and export documentation requirements
- ✓Site conditions, humidity and storage constraints
- ✓Budget range and target commissioning date
Estimates Only: Planning and procurement estimate only. Final formulations, ingredient inclusion, nutrient targets, feed safety, additive use and regulatory compliance must be approved by appropriately qualified professionals and the responsible manufacturer. This calculator is provided for general informational purposes only. Results are approximate and may contain errors, omissions, or outdated information. They do not constitute legal, financial, engineering, tax, technical, or professional advice. Users are solely responsible for independently verifying all calculations, specifications, prices, regulations, and requirements with qualified professionals before making any decisions. By using this calculator, you acknowledge that the website owners, operators, and affiliates accept no responsibility or liability for any loss, damage, or decisions resulting from its use.
FAQ
What does the shrimp micro-pellet planner do?
It translates shrimp stage, pellet size, protein target and water-stability requirement into indicative process requirements — grinding fineness, forming method, binder strategy, drying and coating — plus the brief a supplier needs to quote.
Does grinding fineness really change water stability?
Yes. Particle size must be well below the pellet diameter for the pellet to hold together. Insufficient micro-pulverising is one of the most common causes of water-stability failure in shrimp feed.
Is this financial or engineering advice?
No. Output is indicative only and is not financial advice or engineering design. Final specification requires supplier trials, nutritionist input and local regulatory review.