See financing options
Feed mill ROI planner

Payback, NPV and IRR — with a ramp-up, not a fantasy first year.

Chain your CAPEX and OPEX estimates into a year-by-year cash flow: contribution per tonne, break-even tonnage, payback, NPV at your hurdle rate and IRR. Every figure is yours; FeedMatch publishes no prices and gives no investment advice.

Enter installed CAPEX, cost per tonne and feed value — or run the CAPEX estimator and OPEX estimator first and the values carry across.

Investment and volume

Raw material and finished stock tied up.

Commercial assumptions

Ramp-up, horizon and discount rate are pre-filled as editable placeholders. Feed value is the price you sell at, or pay a third-party mill today — FeedMatch supplies no prices.

From the OPEX estimator.

Labour, maintenance, overhead — carried at any utilisation.

Sale price, or the price you pay a third-party mill today.

Enter your installed CAPEX, all-in cost per tonne, feed value per tonne and yearly output to see payback, margin and cash flow. No figures are assumed.

Test the case against real quotations

A business case is only as good as the CAPEX and ingredient cost behind it. Send the requirement to FeedMatch: a person reviews it, then a supplier-neutral RFQ produces comparable offers against your specification. The USD 250,000 minimum applies to all purchases, including feed, ingredients, premixes, additives and plant and equipment projects and are reviewed by specification, volume and destination.

Scope of this tool

What this tool can and can't do

Feed Mill ROI Planner is a planning tool for budget-stage and RFQ-stage decisions. It gives defensible numbers to compare suppliers against — it is not an engineering, veterinary or financing approval.

What it can do

  • Turn your CAPEX, working capital, cost per tonne and feed value into a year-by-year EBITDA and cumulative cash position.
  • Apply the ramp-up you enter for years one and two before steady-state tonnage.
  • Calculate payback, simple return on investment, NPV at your discount rate, IRR and break-even tonnage.
  • Prefill the request form with the case so the team can review it.

What it can't do

  • Promise returns, savings or financing — every figure follows from your inputs.
  • Model tax, depreciation, financing cost, inflation or residual value at the end of the horizon.
  • Supply feed prices or sales volumes; feed value is the price you sell at or pay a third-party mill today.
  • Replace a bankable feasibility study, an investment recommendation or a lender's assessment.

Required inputs

  • · Steady-state annual tonnage, installed CAPEX and working capital
  • · All-in cost per tonne and fixed cost per year (from the OPEX estimator)
  • · Feed value per tonne
  • · Ramp-up in years one and two (%), horizon (years) and discount rate (%)

Example run

  • · Illustrative inputs, not market prices: 38,400 t/year; CAPEX 3,884,233 plus 500,000 working capital
  • · Cost 361.35 per t with 464,527 fixed per year; feed value 380 per t; ramp 55% and 85%; 10 years at 10%
  • → Contribution ≈ 30.75 per t; break-even ≈ 15,108 t/year
  • → Payback ≈ 7.1 years; NPV at 10% ≈ −613,000; IRR ≈ 7.0% — this case does not clear a 10% hurdle

How the result is calculated

  1. Variable cost per tonne = cost per tonne − fixed cost ÷ annual tonnes; contribution = feed value − variable cost.
  2. EBITDA in a year = tonnes that year × contribution − fixed cost (tonnes = ramp % × steady-state tonnage in years one and two).
  3. Payback = the point where cumulative EBITDA covers CAPEX plus working capital.
  4. NPV = Σ EBITDA ÷ (1 + discount rate)^year − investment; IRR = the rate at which NPV is zero.
  5. Break-even tonnage = fixed cost ÷ contribution per tonne.

Assumptions and placeholders

  • · Ramp-up (55%, 85%), horizon (10 years) and discount rate (10%) are editable placeholders.
  • · Cash flows are EBITDA before tax and financing, with no residual value.

What does this calculator estimate?

It turns your CAPEX, operating cost and feed value into a ramped year-by-year EBITDA, payback, NPV, IRR and break-even tonnage. It is for owners and investors testing whether a mill case holds; outputs are screening estimates from your inputs, not an investment recommendation, a financing offer or a forecast.

What can change the result?

  • · Feed value per tonne
  • · Variable cost per tonne
  • · Fixed cost per year
  • · Ramp-up speed
  • · Installed CAPEX and working capital
  • · Discount rate and horizon

AI agents may use FeedMatch calculators to structure preliminary feed requirements and RFQs. Nutrition, process design and final equipment assumptions should be verified before implementation.

Before relying on the case, replace the CAPEX and ingredient lines with supplier quotations from a structured RFQ. Start a structured RFQ.

Feed mill ROI — questions buyers ask

How is feed mill payback calculated?
Payback is the point at which cumulative EBITDA first covers the installed CAPEX plus working capital. The planner applies the ramp-up you enter for years one and two — pre-filled at 55% and 85% of steady-state tonnage as editable placeholders — instead of assuming full output from day one. Test a slower ramp: it can move payback by years.
What margin per tonne makes a feed mill viable?
There is no universal figure. What matters is contribution per tonne — feed value minus variable cost — against your annual fixed cost. The planner shows break-even tonnage from exactly that relationship, so you can see how far below design capacity the plant can run before it loses money.
Should an integrator build its own mill or keep buying feed?
Enter the price you pay a third-party mill today as the feed value and your own all-in production cost from the OPEX estimator. The contribution per tonne then shows what in-house production would retain at those inputs. Weigh that against CAPEX, working capital, technical staffing and the risk of running below design utilisation. FeedMatch can run a supplier-neutral RFQ for either path — a feed supply contract or a mill project — so both can be compared on real quotations.
What is NPV and IRR telling me here?
NPV discounts each year's EBITDA at the rate you enter and subtracts the investment — positive means the case beats that hurdle rate. IRR is the discount rate at which NPV becomes zero. Both use EBITDA before tax, financing cost and depreciation, with no residual value at the end of the horizon. They are screening indicators, not an investment recommendation; FeedMatch is not a lender or investment advisor.
Can FeedMatch help finance a feed mill project?
FeedMatch is not a lender, broker or financial advisor and has no financing partner it can promise. Financing is a separate, optional step: once the procurement is structured, and only with your separate explicit consent, project information can be prepared for independent providers. Availability, terms and approval are decided only by those providers — nothing on this page is an offer, pre-approval or credit decision.
What does FeedMatch do once the numbers work?
You send the requirement, a person reviews it, and FeedMatch runs a supplier-neutral RFQ against your defined specification and presents the supplier responses to you — there is no direct buyer–supplier contact. FeedMatch's USD 250,000 minimum applies to all purchases, including feed, ingredients, premixes, additives and plant and equipment projects and are reviewed by specification, volume/frequency and destination. FeedMatch does not sell equipment or feed.

FeedMatch Group is an independent, supplier-neutral, human-led sourcing and RFQ platform. FeedMatch is not a feed producer, manufacturer, EPC contractor, farm, nutritionist, lender, broker-dealer, investment advisor or unmanaged marketplace. Nothing on this page is investment, financial or engineering advice; all outputs are indicative planning estimates derived from the values you enter.

WhatsApp