Indonesia · Feed plant projects

Feed mill and aquafeed plant equipment in Indonesia — pelleting and extrusion projects.

Indonesian poultry integrations and shrimp/tilapia producers buy two different plants: compound feed pelleting and aquafeed extrusion. FeedMatch scopes each properly and runs a supplier-neutral comparison across manufacturers able to deliver in-country.

Poultry pelleting 5–30 t/h
Shrimp & tilapia extrusion
Tropical intake & storage
Island logistics scope

Get Free Quotes

Project references

Visual scope of indonesia · feed plant projects

Two plant types, two RFQs

Compound poultry feed and extruded aquafeed share grinding and mixing but diverge completely after conditioning. Quoting them as one package hides cost and confuses suppliers; scope them as separate lines that may share a front end.

Intake, storage and humidity

Ports, truck intake rates and covered storage decide plant availability more often than pellet mill capacity does. Specify intake t/h, silo or flat-store volume, aeration and insect-management approach explicitly.

Power and utilities

Where grid supply is unstable, generator backup and soft-start strategy on large drives must be part of the electrical scope. Ask suppliers for specific energy consumption at your recipe so the generator is sized on real load.

Ingredient supply

Imported soybean meal, wheat, fish meal and additives are the recurring spend. FeedMatch prices the ingredient programme against the same project so the mill is not commissioned into an unpriced supply chain.

Short answer · reviewed August 2026

How is a feed mill specified differently for Indonesia's climate and logistics?

High ambient humidity pushes finished-product moisture targets down (typically 11–12% for pellets, 9–11% for extruded aquafeed) and makes cooler capacity, aspiration and warehouse ventilation part of the core scope rather than an add-on. Multi-island distribution favours bagging lines and palletising over bulk loadout, and imported soybean meal and wheat mean 21–45 days of raw-material storage is common. Sizing itself is unchanged: annual tonnes divided by operating hours, plus headroom.

Indonesian plant reference points

Indonesian plant reference points — values reviewed August 2026 by FeedMatch Group
Metric	Value	Unit	Basis
Poultry mill class	5–30	t/h	Regional producer to integration scale
Aquafeed extrusion line	2–10	t/h	Shrimp and tilapia feed
Pellet moisture target	11–12	%	Tropical storage stability
Raw-material cover	21–45	days	Imported soybean meal and wheat
Bagging orientation	25–50	kg bags	Multi-island distribution

Sources · Feed mill capacity sizing · Feed mill equipment list by capacity · Feed mill cost per tonne of capacity

Ranges are indicative buyer-side benchmarks compiled by FeedMatch Group from supplier offers and the sources above; verify against a current quotation before budgeting.

Indonesia project path

Indonesia → Poultry & aquaculture → Compound feed & aquafeed → Pelleting & extrusion → Tropical storage → FeedMatch Group

Request feed plant proposal Size the plant first

FeedMatch is a supplier-neutral sourcing platform and does not manufacture equipment. Indicative project classes only — final pricing requires a technical specification and current supplier quotations. Project financing may be available subject to buyer, project, country and lender eligibility.

Planning or sizing a feed mill

Cost, equipment scope and capacity in three references — then the ingredient volumes the mill will need every month.

Feed plant projects in other markets

Same supplier-neutral process, scoped to the vertical and equipment each market actually buys.

Not listed? See the 30-market opportunity scorecard or send the specification through the RFQ.

1. What do you need to source? *18 options

2. Species / animal *

3. Type of requirement *

3b. Procurement stage *

Tells suppliers how mature the requirement is and how to structure their quote.

4. Estimated CAPEX / procurement value (USD)

Select the bracket that best matches your allocated or anticipated budget. This helps us route the RFQ to suppliers with the right project capacity.

4b. What are you looking for?

Pick all that apply.

4c. Preferred suppliers or brands (optional)

If you already have suppliers or equipment brands in mind, list them (comma-separated). We benchmark them against comparable qualified alternatives — vendor-neutral, no lock-in.

4d. Preferred technical specification (optional)

House size, climate zone, production target, equipment standards, Incoterms, warranty terms, or any must-have scope items. The more specific, the more comparable the quotes.

4e. Target quote submission date (optional)

When do you need supplier proposals back? We align outreach and reminders to this date.

5. Expected decision / award timeline

6. Where & how big?

6b. Annual volume

6c. Specification, packaging & certification (optional)

7. Your contact details *

💬 Anything else? (pick all that apply)

💰 I'd like to explore trade financing (working capital, letters of credit, supply contracts).

📝 Project description (optional — helps suppliers quote faster)

Free for buyers · Supplier-paid model · No obligation · Human-assisted sourcing

Most buyers receive initial supplier matches within 24–72 hours.

FAQ

Common questions

What equipment does a shrimp feed plant in Indonesia need?

Fine grinding to 60–80 mesh, mixing with liquid addition, preconditioning, extrusion, multi-pass drying, vacuum coating, cooling, sieving and bagging. Shrimp feed requires tighter water stability and smaller pellet diameters than fish feed, which drives extruder and die selection.

How much does a feed mill cost in Indonesia?

It is set by capacity, process type, storage and automation rather than by location. FeedMatch provides an indicative project class and runs current supplier quotations against your specification.

Can one plant make both poultry feed and fish feed?

A shared grinding and mixing front end feeding separate pelleting and extrusion trains is workable and common. A single line trying to do both compromises both products.

Does FeedMatch supply the equipment itself?

No — FeedMatch is a supplier-neutral sourcing and procurement platform connecting buyers with manufacturers, suppliers and project partners.